How Do I Turn On My Band Steering UniFi?

How do I activate UniFi airtime fairness?

Enable ATF (Airtime Fairness) if you have more than 10 clients (give or take) to get equal bandwidth across all clients.

To be able to actually see the Airtime Fairness properties on the device, make sure you enable Advanced Features first under Settings -> Site -> Services..

Can I use both 2.4 and 5GHz at the same time?

Simultaneous dual-band routers are capable of receiving and transmitting on both 2.4 GHz and 5 GHz frequencies at the same time. This provides two independent and dedicated networks which allows more flexibility and bandwidth.

Should I separate 2.4 GHz and 5GHz?

No. What you want to do, is get as many devices setup using 5Ghz, and use the 2.4Ghz as a fall-back. The reason is that because 2.4Ghz bands overlap, 2.4Ghz is usually very overcrowded with neighbour networks. 5Ghz allows a faster speed too depending on the specifications.

What is band steering on a router?

Band steering is a feature that simplifies and improves your home WiFi experience by automatically connecting your devices to the frequency that offers stronger signal, less interference and is better suited to your device. In rare occasions, you might face some issues when band steering is turned on.

How do I turn my band steering off?

Wi-Fi Gateway Band SteeringConnect directly to your gateway via an Ethernet cable or wirelessly via your Wi-Fi.Open a web browser and visit 192.168.0.1.Sign in using the following credentials. … Click “Wireless” from the top bar.Under “Basic Settings” select “5G” and turn “Band Steering” to ‘disabled’Save your changes.

What is airtime fairness?

Airtime Fairness gives equal amounts of air time (instead of equal number of frames) to each client regardless of its theoretical data rate. This will ensure higher download speed to latest devices when slower devices are connected to the same AP.

How do I know if I have 2.4 GHz or 5GHz?

From your smartphone’s Wireless settings page, look at the names of your Wi-Fi networks.A 2.4 GHz network may have “24G,” “2.4,” or “24” appended to the end of the network name. For example: “Myhomenetwork2.4″A 5 GHz network may have “5G” or “5” appended to the end of the network name, for example “Myhomenetwork5”

How do you turn on band steering?

Enabling Band SteeringNavigate to Configure > Access control.Select the target SSID using the SSID drop-down at the top of the page.Scroll down to the Wireless options section.Select Dual band operation with Band Steering.Click Save Changes.

What channel width should I use for 5GHz?

When using 5GHz, it is recommended to use at least 40MHz channel width, as some client devices may not prefer 5GHz unless it offers a greater channel width than 2.4GHz. The following 5GHz channels are supported with 20MHz channel width: 36. 40.

Should I enable airtime fairness?

When to use Airtime Fairness You should generally enable Airtime Fairness when you have several devices connected to the network, especially so if you have connected legacy devices along with faster wifi devices. … You want to make sure that every customer connected to your Wifi gets their fair share of wifi data.

Does 5GHz WiFi go through walls?

5 GHz networks do not penetrate solid objects such as walls nearly as well as do 2.4 GHz signals. This can limit an access points reach inside buildings like homes and offices where many walls may come between a wireless antenna and the user. … However, 5GHz networks are not necessarily faster than 2.4GHz.

Should I enable band steering on my router?

Band steering should always be used However, band steering will prove problematic if coverage on 5 GHz is significantly weaker and has coverage holes, as compared to coverage for 2.4 GHz.

What is band steering threshold?

Explanations: 5GHz Maximum Connection Threshold means the “maximum number of clients that can be connected to CAP’s 5GHz wireless network in priority”. In this instance, we set it as “40”, which means Band Steering function will guide the first 40 dual-band clients to connect to CAP’s 5GHz wireless network in priority.

What devices should be on 2.4 GHz and 5GHz?

Ideally, you should use the 2.4GHz band to connect devices for low bandwidth activities like browsing the Internet. On the other hand, 5GHz is the best suited for high-bandwidth devices or activities like gaming and streaming HDTV.

What is UniFi band steering?

Band Steering basically tells your clients to prefer 5Ghz or whatever band you want them to prefer, but 5Ghz is what I want.

How does WiFi band steering work?

Band steering is a technique used in dual band WiFi equipment that encourages newer client devices to use the less congested 5 GHz network. … This ensures that the 5 GHz devices (like your phone or television) can achieve peak performance without being slowed down by the older 802.11b/g clients on the network.

What is Unifi airtime fairness?

Unifi APs support “band steering,” which attempts to encourage clients to connect to the 5GHz SSIDs instead of 2.4GHz. You can also turn on airtime fairness, which tries to enforce limits on the number of clients per AP to ensure that each client has a certain minimum amount of transmit/receive time allocated to it.

How much faster is 5GHz than 2.4 GHz?

Speed comparison – 2.4 GHz vs. 5 GHzStandardFrequencyTheoretical Speed802.11g2.4Ghz54 Mbps802.11n2.4Ghz300 Mpbs802.11n5Ghz900 Mbps802.11ac5Ghz433 Mbps – 1.7 Gbps2 more rows

Do dual band routers switch automatically?

A dual band router doesn’t switch frequencies, it broadcasts on two frequencies simultaneously. … Yes, every time it’s possible to connect the device on 5 GHz it goes for it, when signal is not strong enough, it automatically switch to 2.4 GHz, always looking for get back to 5 GHz.

Should I disable 2.4 GHz?

In layman’s terms, that means it’s easier for multiple high-frequency Wi-Fi devices to connect to the same router with less interference. … You might find that disabling 2.4GHz doesn’t cause any range or interference problems at all—the only way to know is to try it out.

Should you use the same SSID for 2.4 GHz and 5ghz?

The advantage of using the same SSID is that your devices can roam between 2.4Ghz and 5Ghz and pick what they use. It is easy to set up on your devices and seems care free. … As 2.4Ghz carries further than 5Ghz you will see your devices gradually all move to the 2.4Ghz band and the 5Ghz band is awkwardly empty.