Quick Answer: Can I Use 1066 And 1333 Ram Together?

Can I use different MHz RAM together?

You can use memory modules of different speeds as long as they are faster than those specified for your computer.

It is recommended to use modules of the same speed as those already installed in your system.

If you do mix speeds, the modules will all run at the speed of your slowest modules..

Is 1600mhz RAM good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Is higher frequency RAM better?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. … This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

Can you use ddr3 1333 instead of 1600?

Well, yes DDR3 1600 is compatible with DDR3 1333 MHz. But using them together both will have same speed.

Can I add 8gb RAM to 4gb laptop?

In technical aspect, a 8GB RAM stick can be added to a computer 4GB RAM as long as both of 8GB and 4GB have the same speed front side bus speed. For better performance, the both of RAM sticks should have also same size not only same speed.

Can you put ddr3 1333 instead of 1066?

Technically yes. Your motherboard will automatically down clock the 1333 RAM to 1066 to match the other stick. However, it’s always a good idea to buy modules in pairs. The reason is because the two modules are tested and compatibility is verified.

Does 1333mhz RAM work in 1066?

Both memory modules should work and operate at 1066 MHz. If properly supported, the modules will operate in dual-channel mode, but both modules will be limited to the slower one, which is unlikely to be noticeable. There should not be any significant problems in terms of system performance or stability.

What is the difference between 1066 and 1333 Ram?

Hi, The 1333 stick runs at 21Gb/s and the 1066 stick runs at 17Gb/s. So, there’s a 4 Gb/s loss on each stick used. You may calculate accordingly depending on the number of RAM sticks used.

Why does my 1600mhz RAM shows 1333mhz?

You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.

Does RAM speed matter?

Your RAM’s speed does not alter how fast your CPU goes, even when overclocked or hyper-threaded, but it can slow the CPU down depending on if your RAM is full or not. … For the most part, the faster your RAM speed is, the more likely you are going to have success working on large files.

Which is faster ddr3/1600 or 1333?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Is it better to have more RAM or faster RAM?

Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM.

Can I use 1333mhz and 1600mhz RAM together?

2 Answers. Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

What is the difference between 1333mhz and 1600mhz RAM?

Hello. There is really no performance difference between running the RAM at 1333MHz compared to 1600MHz. The reason to buy 1600MHz is if you are heavily OCing. When you OC the CPU (unless you’ve got an unlocked multi like the 955) you also change the frequency the RAM.

Can 1600mhz ram work on 1066?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.

Can ddr3 1066 Replace 1600?

You will likely find that the 1600 RAM will offer better timings at the slower speeds than comparable 1333/1066 RAM – so even if you don’t go for overclocking, there may still be a small performance benefit.

Can I add 8gb RAM to 4gb?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Can I use 2 different Ram brands?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.